Fashion trends come and go, and diamond forms are no exception. Each of the ten most frequent diamond shapes has a distinct value depending on the demand for that form. So, how do you determine the value of your diamond? What can you do with a diamond shape that is no longer in fashion?
The traditional round diamond is the most well-known diamond shape. There are plenty of alternative shapes to pick from if you’re searching for something different. Each diamond has properties that influence how it appears. The marquise diamond, for example, is a more contemporary cut that has fallen out of favor. This diamond appears archaic and old-fashioned to many people. Re-cutting the marquise diamond is one thing that can be done to improve its demand. The marquise is frequently recut into an oval or pear, which are both in higher demand than the marquise.
A marquise diamond, like the round, pear, princess, and oval shapes, is a diamond shape. On both edges, this distinctive design combines the length of an oval-shaped diamond and the point of a pear-shaped diamond. While a marquise-shaped diamond is less well-known than a dazzling round diamond, it has a number of advantages. Let’s take a closer look at this specific diamond shape, its history, and its current status in the diamond market.
Table Of Contents
- What Is A Marquise Cut Diamond?
- Can You Recut A Marquise Diamond?
- Effects Of Re-cutting A Marquise Diamond
- Where To Get Your Marquise Diamond Recut?
- What Shapes Can You Cut Your Marquise Diamond Into?
- Should You Get Your Marquise Diamond Recut?
- Conclusion
What Is A Marquise Cut Diamond?
The shape of a marquise diamond is an elongated elliptical with pointy ends. A Marquise diamond has 58 facets on average.
Marquise diamonds can give the impression of greater size due to their long and thin design.
The extended design of these rings is said to make the wearer’s finger appear longer and slimmer.
The name “Marquise Cut” comes from a fable about the Marquise of Pompadour. The Sun King, according to mythology, wanted a stone polished into the shape of the Marquise’s mouth. A length-to-width ratio of 1.75:1 to 2:1 is often regarded as the most appealing. The consumer’s taste, like that of other fancy shapes, plays a role in the judgment. A marquise diamond has 56 facets on average.
A marquise diamond, like the round, pear, princess, and oval shapes, is a diamond shape. On both edges, this distinctive design combines the length of an oval-shaped diamond and the point of a pear-shaped diamond. While a marquise shaped diamond is less well-known than a dazzling round diamond, it has a number of advantages. Let’s take a closer look at this specific diamond shape, its history, and its current status in the diamond market.
The marquise brilliant diamond, also known as the “Navette” form, which means “small boat,” uses the well-known brilliant cut for maximum brilliance and shine, as its full name implies. The diamond’s boat-like shape means it’s thinner at the ends and fuller in the center. A marquise diamond has 58 facets on average, with 33 on the crown and 25 on the pavilion. The pavilion’s number of facets, however, may vary.
Marquise diamonds can be cut with French tips, which are used on pear and heart-shaped diamonds, or with bezel facets at the points. The ideal ratio for a marquise diamond is 2:1, but most marquise diamonds are cut with ratios ranging from 1.85 to 2.10, depending on personal choice.
Can You Recut A Marquise Diamond?
Yes, you can recut a marquise diamond!
This is great news for someone who has had a marquise diamond for a long time. These cuts have been known to chip and crack over time. The tips of marquise diamonds are infamous for chipping since they are thin and narrow. In this case, re-cutting the diamond is an excellent option for repurposing it. Cutting a marquise into a more popular shape not only repurposes it but also increases its demand. Because of this, oval and pear shapes are suitable choices for recutting a marquise diamond.
The good thing is that our gems can evolve with our tastes.
Effects Of Re-cutting A Marquise Diamond
The “bow-tie effect,” which affects all other extended shapes, is the marquise cut’s major flaw. When viewed from certain angles, the bow-tie effect is a black shadow that appears in the center of the stone. It appears because the light is reflected off the bottom of the stone and out the sides, rather than returning to the viewer’s eye through the top of the diamond.
The bow-tie effect’s visibility is determined by how well each stone is cut, however, a well-cut diamond will greatly diminish its visibility.
Another thing to keep in mind with marquise-cut engagement rings is that the sharp points at either end, as well as the narrow ‘girdle’ (the edge that goes around the stone), are relatively delicate, making it subject to chipping if it is dropped on a hard surface.
Even though diamonds are the toughest naturally occurring material, they do require care, and this should be considered, as someone prone to occasional acts of clumsiness may be better suited to another elongated form that is cut without the exposed points of the marquise cut. In this scenario, an oval cut might be the best option.
Regardless of the fact that marquise diamond engagement rings are a great choice for design and glitter, they are still considered a unique option. Because of the low demand, most brick-and-mortar stores will only have a small selection of rings to choose from, if any at all. Cape Diamonds, on the other hand, provides a far broader assortment and allows you to specify exactly what you desire.
Unlike round brilliant diamonds, marquise diamonds aren’t graded with an overall “cut grade” by most laboratories, making it a little more difficult to guarantee that you’re buying a good stone. So, in this section, we’ll go over everything you should think about to acquire the most brilliant stone possible while minimizing the bow-tie effect.
To avoid chipping and snagging, the tapering points of a marquise cut diamond must be protected by prongs. Make sure there are no inclusions in these sensitive tips.
Furthermore, marquise cut diamonds have a bowtie. It may take some time to find a diamond with a small bowtie.
A marquise cut diamond’s symmetry is critical, yet it can be difficult to discern. Examine the shape carefully to ensure that it is symmetrical.
Where To Get Your Marquise Diamond Recut?
Before re-cutting a marquise diamond, it’s critical to inspect its shape and performance. If you’re shopping online, seek merchants who offer close-up videos so you can see the jewels in person. You can also take your diamond to a jewelry store and have it recut; most independent jewelers can do so. That’s the most straightforward approach to have it fixed. It won’t be cheap, and it certainly won’t be quick (probably at least 6 weeks upon approval).
What Shapes Can You Cut Your Marquise Diamond Into?
When re-cutting diamonds, a jeweler doesn’t want to remove too much material in order to obtain a better cut. Otherwise, the diamond’s value could be lowered due to its lower carat weight. Marquise diamonds are frequently cut into pears or ovals for this reason.
Should You Get Your Marquise Diamond Recut?
Yes, you certainly can. If you’ve inherited a lovely old diamond but don’t care for the vintage style, you can have it cut to suit your modern tastes and aesthetic. Recutting marquise diamonds to fit a modern aesthetic is a common choice.
Damaged diamonds can be recut (as long as the fracture does not extend the entire length of the stone). For a professional evaluation, it might be delivered to diamond cutters (and may need to be sent loose; out of the mounting). Yes, some carat weight will be lost, which is to be expected. The cutters will have to restructure the stone to the best feasible form (which may or may not be ideal) and replicate the point. It could reduce the overall weight by 10% or more (which means you’ll have to have a fresh appraisal on the ring, which could be costly).
Re-cutting a diamond can also help remove inclusions, according to certain jewelers. Cutting one or both points off a marquise with a feather, crystal, or other defects in one of the points, for example, would improve the diamond’s quality. A jeweler may even send a diamond to be graded again by a gemological lab to boost its value if the reduction in inclusions is significant.
Conclusion
A diamond lasts a lifetime. But what if you wish to repurpose a diamond for a new purpose? Is it safe to recut a diamond to suit your tastes? Yes, you certainly can. If you’ve inherited a lovely old diamond but don’t care for the vintage style, you can have it cut to suit your modern tastes and aesthetic. Re-cutting marquise diamonds to fit a modern aesthetic is a common choice.
The marquise diamond cut has a lovely history and a romantic tale to tell. Don’t let your diamond go unused and unloved in a drawer. Choose the ideal design for you and your diamond.
Ten articles before and after
Is A Solitaire Engagement Ring Boring?| CHURINGA
Why Are Diamonds So Expensive?| CHURINGA
Paparazzi Jewelry: Everything You Need To Know| CHURINGA
Cathedral Setting vs. Tiffany Ring Setting| CHURINGA
What Is Diamond Fire?| CHURINGA
What Is A Dinner Ring?| CHURINGA
What Is A Twinning Wisp Diamond Inclusion?| CHURINGA
Should I Let My Girlfriend Pick Her Engagement Ring?| CHURINGA