SSJZ-002 Gold Plated Eagle Police Station US A Signet Rings

5.00 out of 5
(1 customer review)

Description

Buy trendy, wholesale gold plated jewelry for men, women, and children. Explore the huge collection and get wholesale prices at unecklace.com

What brand of jewelry does factory connection sale – Churinga Stainless Steel Jewelry Wholesale

Shop factory direct jewelry from Churinga Stainless Steel Jewelry Factory/Manufacturer in China. Over 5000 designs are available in stock! Browse Churinga 316L Stainless Steel Jewelry for the latest designs of Earrings/Rings/Bracelets/Necklaces/Pendants, All at attractive wholesale prices Manufacturer by Churinga Jewelry. We provide the largest selection of wholesale stainless steel costume jewelry, wholesale stainless steel gold plated Jewelry, wedding engagement rings, etc. Shop at unecklace.com if you want to go into the jewelry business.

Click stainless steel jewelry wholesale if you want to know more about dripping black oil earrings.

How It’s Made: Lost Wax Casting – Carving Rings

Each design begins as a series of sketches to flesh out the design and measurements for the final piece. The carving sometimes changes along the way, but a good sketch gives us a road map to follow at the start.
We begin the carving process by sawing off a slice of wax in the right thickness. We take care to make sure the sides are flat and parallel since we’ll be using them to mark and measure.
Next, we’ll enlarge the hole to the appropriate finger size.

carving rings process - jewelry wax

carving rings process - jewelry polishing

Using we use a set of calipers to mark measurements around the wax for the profile of the ring.
Using the markings as a guide, we’ll use a cylinder bur to quickly trim away the excess wax. This process takes just a few minutes to remove a good deal of material.
The wax begins to take on a more ring-like shape. Now we can switch to hand tools to carve into it from all sides.
The band is still quite wide, so we’ll use a bur to remove a few millimeters on either side. The top of the ring is trimmed down into a rough hexagon shape.
We switch to finer hand tools and carve much slower to refine the final shape. These wax carving tools come in a variety of shapes to fit into different spaces. They are very sharp. We can use them to dig into the surface or to remove tiny shavings of wax.

carving rings process - jewelry adjustment measurement

carving rings process - jewelry zircon setting

Even the inside of our ring gets special attention. A round bur fits nicely to contour the underside. We’ll smooth out the surface of the wax model, round the edges on the band, and chip away at the design until it’s just right. It’s important that the ring looks proportional from all angles.
The top of our ring needs a few chiseled facets around the stone. Each one is carved out under the microscope to ensure they’re perfectly straight.
Finally, beads are added to our wax model that will eventually hold the diamond into place. We melt these into place using a warm wax tool. Our model is now ready for casting!

How do you carve rings?

What is the Spiritual Meaning of the Golden Eagle?

With its acute eyesight, the Golden eagle has come to embody an all-seeing EYE. The Golden Eagle is often a solar symbol and can be linked to all-sky gods. It signifies inspiration, release from bondage, victory, longevity, speed, pride, father, and royalty; it is often an emblem for powerful nations.

Bulk buy stainless steel gold plated jewelry online from Chinese suppliers on unecklace.com. Get deals with coupons and discount codes! Source high quality at Churinga.

Churinga Golden Eagle Product Series Introduction

Our Eagle designs are some of our oldest and most loved pieces and you can in our collection find Eagle rings, as well as our Soaring Eagle pendant.

Eagles have since ancient times been used as a symbol for strength and leadership, and it’s no coincidence that eagles have often been used as a banner or logo for empires throughout history, all the way back to ancient Egypt and Native Indians to our current United States. The Eagle is often a symbol of bravery and is meant to encourage and inspire people to reaching higher and pushing their limits to see what they can do. Eagles are meant to bring a sense of courage, as well as a desire to explore and grow. Dreaming of flying eagles is a symbol of good fortune coming your way, but if it scares or attacks you, this might mean you have some self-imposed limitations to push through. In Christianity, the eagle is seen as a symbol of hope, strength, and salvation, while in Islam it represents warlike ferocity and dominion.

The eagle is the biggest and strongest bird and can conquer the sky, which is why eagle symbolism can only be a good thing. The eagle is ferocious whether it’s flying high or close to the ground, and also tells you to save energy for the long flight ahead, on pursuits that matter, and on people who will bring happiness, positivity, and growth to your life. Step out of your comfort zones and reach higher heights.

The eagle is also associated with self-discovery, renewal, and rebirth, as well as inner strength and courage – if you put your heart and mind to it, you can fly high and free.

To summarise some of the Eagle qualities and symbolism

  • As the eagle conserves its energy you should save yours for things that matter.
  • You need to embrace your freedom.
  • Explore the unknown areas in your life.
  • Know when to strike for maximum impact, and embrace changes coming your way instead of hoping things will fall into your lap and life sort itself out.

More on Eagle lover via contact us, buying Churinga Jewelry.

316l stainless steel Jewelry Details

CHURINGASJZ-0079 Gold Plated Stainless Steel Eagle Rings, Carving Rings
CHURINGASJZ-0079 Gold Plated Stainless Steel Eagle Rings, Carving Rings
CHURINGASJZ-0079 Gold Plated Stainless Steel Eagle Rings, Carving Rings
CHURINGASJZ-0079 Gold Plated Stainless Steel Eagle Rings, Carving Rings

Who is the best jewelry factory in China?

Churinga is the best jewelry factory in China. Churinga is one of the best jewelry factory brands in China.

Churinga is affiliated with Hotsell Company Limited, and it is a professional fashion jewelry manufacturer in China, set design, production, wholesale, and export trade as one of the enterprises. Product substrate metals are stainless steel, copper alloy, and silver, a surface thin layer of gold plated, rhodium plated or palladium plating, auxiliary material with artificial gem (synthetic cubic zirconia, synthetic crystal, synthetic ruby, etc).

Product variety, style fashion, good quality, which covers rings, pendants, earrings, bracelets, necklaces, anklets, bangles, jewelry sets, etc. Our series products are sold all over the world, we provide good services to all of the customers at home and abroad.

We are one of the Chinese leading Jewelry manufacturers providing high-quality jewelry with fast delivery and the most competitive pricing. Customized service is our professional offer.

Churinga Jewelry Factory Team

our team

Churinga Jewelry Factory Certifications

certifications

How does a jewelry factory? – Churinga Jewelry Factory Production process

HOW IS JEWELRY MADE? WHAT IS THE PROCESS OF MAKING JEWELRY?

STEP 1: DESIGNING A 3D JEWELRY MODEL

After the initial idea and/or sketch is developed, it’s time to start work on the digital model. Using CAD (Computer-Aided Design) software, the 3d designer will make a digital render of your jewelry.

Churinga CAD mold making

carving rings wholesale

STEP 2: 3D WAX PRINTING YOUR JEWELRY

In most modern jewelry production, the manufacturer uses a 3d printing machine to print a wax model made out of resin, which usually doesn’t take more than 48 hours.

The Rubber Mold

The original model is encased in plaster-like investment, which is specially created for jewelry making. After the investment sets, the encased wax model is burned away in an oven, leaving a jewelry-shaped void in the hardened investment. That space is filled with silver, forming a slightly smaller duplicate of the original wax design, which is polished to perfection. The silver master model is then packed into a fat sandwich of special mold rubber and squeezed tight under high heat and pressure until it forms a solid block. The rubber forms itself around the master model, creating a perfect three-dimensional impression of the piece of jewelry. The rubber is cut in half to remove the silver master. Then the rubber is put back together and hot wax is injected through a hole in the rubber to fill the ring-shaped space inside, forming a wax reproduction of the master model (but a bit smaller).

The Wax Tree

To finally turn wax into gold, a number of wax models, usually 10 or 20 are placed on a large branching wax tree. Positioning each piece on the tree must be done carefully, thicker pieces will go on the bottom, thinner on the top and the joint where the piece is joined to each branch must be positioned in a thick place in the design, where there is no detail, like the back of a ring. When the tree is complete, the whole wax structure is placed in a flask.

STEP 3: CASTING THE WAX MODEL INTO METAL

The jewelry goes through the casting process. At this stage, your piece starts looking more like the jewelry you might see in a store. The wax is melted away and is replaced with your metal of choice in molten form, usually gold, silver, or platinum. The metal then dries into the shape of your jewelry. This technique is called “lost wax” casting.

STEP 4: THE PRE-POLISH

First, the jewelry has to be removed from the branch, or sprue, that held it to the tree in the mold. It is then is tumbled into smoothness, sometimes sanded, lapped to make edges crisp, and then buffed by hand on a polishing wheel.

STEP 5: BASIC JEWELRY ASSEMBLY

After your jewelry passes through the design and casting stage, the final fabrication can take anywhere from 3 days to 3 weeks. At this point, the jeweler refines the main structure of your ring, necklace, or another piece.

carving rings wholesale

carving rings wholesale

STEP 6: THE STONE SETTING PROCESS

For this step, the diamond setter finally adds the diamonds or other gemstones onto your piece. He carefully sets the central stone into the mount. If side stones are involved, the setter needs to hand drill for these before setting. Using a microscope, they then set each separate stone.

STEP 7: POLISHING, FINISHING, AND QUALITY ASSURANCE

In the final stage, a polisher works to make sure the metal is polished to perfection so it’s as shiny as possible. Or it only needs a light final polish to bring out the luster and shine of the gold. This is done by putting a fine red jeweler’s rouge on a soft cotton cloth and buffing the piece by hand, making sure that all the details and highlights shine. Finally, the jewelry is inspected and each detail is analyzed to make sure production was successful.

Churinga Jewelry Factory Shipping And Payment

We support global supply. Meet your jewelry business with optimal efficiency.

shipping-and-payment

Jewelry Stores Near Me – Churinga Jewelry Factory

 

shipping and payment

Churinga Jewelry Factory FAQ

Q1: Are you direct factory wholesale?

A1:Yes, we are direct factory manufacture with more than 10 years experience. Over 200 new arrivals are launched each month. welcome, contact our customer service to know more details.

Q2: Can I place a sample order?

A2:Yes, we welcome samples to check the quality, mixed samples are acceptable. Depending on the design, the design fee charged for samples is $30-$50, and the sample fee will be refunded when ordering in bulk.

Q3: Can I get mixed products?

A3: Yes. Mix color and designs are available.

Q4: Is there a discount for larger orders of Jewelry?

A4: For new customers, there is a small discount, but when the value of the order is increased, we will provide a larger discount. For previous customers, we are happy to provide a discount for your loyalty. Please enquire.

Q5: How to place an order?

A5: You can choose some items you like online, or you can write down the item/code number, with quantities you want, contact our customer service to place an order.

Q6: Can I get one customized sample that laser my logo or make my design?

A6: Yes, OEM or ODM is welcome. customized designs, materials, sizes & colors are available. our designer will according to your picture or ideas to draw/design pictures. The product will arrange production when you confirm. We are willing to provide you with one/two samples for your testing of our design and quality. Sample charged the US $20-100/design depends on the design, sample charge will refund upon bulk order.

Q7: What is the lead time?

A7: It depends on the order quantity and the season you place the order. Generally, it is 2-3 days after getting payment if the goods are in stock. If it is not in stock, normally 7-15 days for small quantity and simple style, and about 25-30 days for large quantity and complicated style. Please kindly contact us and we will provide you with an estimated production time more exactly based on your need.

Q8: When can I get the quotation?

A8: We usually quote you within 24 hours after we get your inquiry. If you are very urgent to get the quotation. Please call us or tell us in your mail, so that we could regard your inquiry priority.

Q9: What’s your after-sales service?

A9: We will have a full inspection before the order ship out, but once you find any defective/short of quantity/other problem, pls send us the related pictures by email within one week, we will suggest to you our best solution to satisfy your requirement.

Read More: stainless steel vs sterling silver

Additional information

Weight 0.025 kg
Dimensions 2.6 cm
MOQ

Shipment

ODM/OEM

Jewelry Brand

Jewelry Quality

Jewelry Material

Jewelry Number

CHURINGASJZ – 0079

Jewelry Wholesale Price Range

3.2 – 4.2

1 review for SSJZ-002 Gold Plated Eagle Police Station US A Signet Rings

  1. James McCune
    5 out of 5

    James McCune

    I really like the feel of these wholesale carving rings. It feels very textured.

Add a review
CHURINGASJZ-0079
SSJZ-002 Gold Plated Eagle Police Station US A Signet Rings