316L Stainless Steel Jewelry Factory Wholesale High Quality Vintage Religion Style Double Ghost Minimalist Skull Flower Pattern 3d Carving Cross Pendants

5.00 out of 5
(2 customer reviews)


The Meaning of the Churinga Jewelry Factory Cross Pendant Necklace

Wearing a necklace featuring a cross is a symbol of faith, represents that person’s beliefs, provides comfort, and promotes awareness. For that reason, cross jewelry has been worn for centuries, and it is still popular today. Churinga jewelry factory will tell you.

Papal Cross: Only used by the Pope, this cross features three horizontal bars, all toward the top of the vertical bar. The top is the shortest, and the bottom is the longest.

Pectoral Cross: Typically only worn by bishops, this cross is about six inches wide and sits at the middle of the chest as opposed to near the collarbone.

Latin/Roman Catholic Cross: The cross is simple, but the vertical bar is longer than the horizontal bar.

Celtic Cross: In addition to the vertical and horizontal bars of the cross, the Celtic cross includes a ring around the intersection of the bars. Although its origins are unclear, it is believed to be associated with regions evangelized by Irish missionaries from the 9th through the 12th centuries, as well as with the Celtic Revival of the 19th century.

Russian Orthodox Cross: The Russian Orthodox cross features two additional horizontal beams. The first and shortest beam represents the signage on the cross. The middle and widest beam represents the beam where Jesus’s hands were nailed to the cross. The lower beam, which is slanted upward and is found at the bottom half of the vertical bar, represents the footrest.

Crucifix: The crucifix depicts an image of Jesus on the cross and is a symbol of nearly all Christian denominations. It is especially common in the Roman Catholic denomination but is also used in the Eastern Orthodox, Oriental Orthodox, Eastern Catholic, Lutheran, Moravian, and Anglican churches.

Greek Cross: The vertical and horizontal bars are of equal length.

Armenian Cross: The Armenian cross has decorative elements at each tip for a total of eight wings.

Canterbury Cross: The vertical and horizontal bars are even in length to create a round appearance similar to a brooch. It serves as an emblem and is associated with the Anglican church.

Greek Orthodox: The Greek Orthodox cross features rings near each of the edges of the vertical and horizontal bars.

What brand of jewelry does factory connection sale?

Shop factory direct jewelry from Churinga Stainless Steel Jewelry Factory/Manufacturer in China. Over 5000 designs are available in stock! Browse Churinga 316L Stainless Steel Jewelry for the latest designs of Earrings/Rings/Bracelets/Necklaces/Pendants, All at attractive wholesale prices Manufacturer by Churinga Jewelry. We provide the largest selection of wholesale stainless steel costume jewelry, wholesale stainless steel gold plated Jewelry, wedding engagement rings, etc. Shop at if you want to go into the jewelry business.

Jewelry Details

CHURINGASDZ-0102 Stainless Steel Cross Pendant, Minimalist Skull Pattern Pendant
CHURINGASDZ-0102 Stainless Steel Cross Pendant, Minimalist Skull Pattern Pendant
CHURINGASDZ-0102 Stainless Steel Cross Pendant, Minimalist Skull Pattern Pendant
CHURINGASDZ-0102 Stainless Steel Cross Pendant, Minimalist Skull Pattern Pendant
CHURINGASDZ-0102 Stainless Steel Cross Pendant, Minimalist Skull Pattern Pendant

Who is the best jewelry factory in China?

Churinga is the best jewelry factory in China. Churinga is one of the best jewelry factory brands in China.

Churinga is affiliated with Hotsell Company Limited, and it is a professional fashion jewelry manufacturer in China, set design, production, wholesale, and export trade as one of the enterprises. Product substrate metals are stainless steel, copper alloy, and silver, a surface thin layer of gold plated, rhodium plated or palladium plating, auxiliary material with artificial gem (synthetic cubic zirconia, synthetic crystal, synthetic ruby, etc).

Product variety, style fashion, good quality, which covers rings, pendants, earrings, bracelets, necklaces, anklets, bangles, jewelry sets, etc. Our series products are sold all over the world, we provide good services to all of the customers at home and abroad.

We are one of the Chinese leading Jewelry manufacturers providing high-quality jewelry with fast delivery and the most competitive pricing. Customized service is our professional offer.

Churinga Jewelry Factory Team

our team

Churinga Jewelry Factory Certifications


How does a jewelry factory?



After the initial idea and/or sketch is developed, it’s time to start work on the digital model. Using CAD (Computer-Aided Design) software, the 3d designer will make a digital render of your jewelry.


In most modern jewelry production, the manufacturer uses a 3d printing machine to print a wax model made out of resin, which usually doesn’t take more than 48 hours.

The Rubber Mold

The original model is encased in plaster-like investment, which is specially created for jewelry making. After the investment sets, the encased wax model is burned away in an oven, leaving a jewelry-shaped void in the hardened investment. That space is filled with silver, forming a slightly smaller duplicate of the original wax design, which is polished to perfection. The silver master model is then packed into a fat sandwich of special mold rubber and squeezed tight under high heat and pressure until it forms a solid block. The rubber forms itself around the master model, creating a perfect three-dimensional impression of the piece of jewelry. The rubber is cut in half to remove the silver master. Then the rubber is put back together and hot wax is injected through a hole in the rubber to fill the ring-shaped space inside, forming a wax reproduction of the master model (but a bit smaller).

The Wax Tree

To finally turn wax into gold, a number of wax models, usually 10 or 20 are placed on a large branching wax tree. Positioning each piece on the tree must be done carefully, thicker pieces will go on the bottom, thinner on the top and the joint where the piece is joined to each branch must be positioned in a thick place in the design, where there is no detail, like the back of a ring. When the tree is complete, the whole wax structure is placed in a flask.


The jewelry goes through the casting process. At this stage, your piece starts looking more like the jewelry you might see in a store. The wax is melted away and is replaced with your metal of choice in molten form, usually gold, silver, or platinum. The metal then dries into the shape of your jewelry. This technique is called “lost wax” casting.


First, the jewelry has to be removed from the branch, or sprue, that held it to the tree in the mold. It is then is tumbled into smoothness, sometimes sanded, lapped to make edges crisp, and then buffed by hand on a polishing wheel.


After your jewelry passes through the design and casting stage, the final fabrication can take anywhere from 3 days to 3 weeks. At this point, the jeweler refines the main structure of your ring, necklace, or another piece.


For this step, the diamond setter finally adds the diamonds or other gemstones onto your piece. He carefully sets the central stone into the mount. If side stones are involved, the setter needs to hand drill for these before setting. Using a microscope, they then set each separate stone.


In the final stage, a polisher works to make sure the metal is polished to perfection so it’s as shiny as possible. Or it only needs a light final polish to bring out the luster and shine of the gold. This is done by putting a fine red jeweler’s rouge on a soft cotton cloth and buffing the piece by hand, making sure that all the details and highlights shine. Finally, the jewelry is inspected and each detail is analyzed to make sure production was successful.

production process

Churinga Jewelry Factory Shipping And Payment

We support global supply. Meet your jewelry business with optimal efficiency.


Churinga Jewelry Stores Near Me

shipping and payment

Churinga Jewelry Factory FAQ

Q1: Are you direct factory wholesale?

A1:Yes, we are direct factory manufacture with more than 10 years’ experience. Over 200 new arrivals are launched each month. welcome, contact our customer service to know more details.

Q2: Can I place a sample order?

A2:Yes, we welcome samples to check the quality, mixed samples are acceptable. Depending on the design, the design fee charged for samples is $30-$50, and the sample fee will be refunded when ordering in bulk.

Q3: Can I get mixed products?

A3: Yes. Mix color and designs are available.

Q4: Is there a discount for larger orders of Jewelry?

A4: For new customers, there is a small discount, but when the value of the order is increased, we will provide a larger discount. For previous customers, we are happy to provide a discount for your loyalty. Please enquire.

Q5: How to place an order?

A5: You can choose some items you like online, or you can write down the item/code number, with quantities you want, contact our customer service to place an order.

Q6: Can I get one customized sample that laser my logo or make my design?

A6: Yes, OEM or ODM is welcome. customized designs, materials, sizes & colors are available. our designer will according to your picture or ideas to draw/design pictures. The product will arrange production when you confirm. We are willing to provide you with one/two samples for your testing of our design and quality. Sample charged the US $20-100/design depends on the design, sample charge will refund upon bulk order.

Q7: What is the lead time?

A7: It depends on the order quantity and the season you place the order. Generally, it is 2-3 days after getting payment if the goods are in stock. If it is not in stock, normally 7-15 days for small quantity and simple style, and about 25-30 days for large quantity and complicated style. Please kindly contact us and we will provide you with an estimated production time more exactly based on your need.

Q8: When can I get the quotation?

A8: We usually quote you within 24 hours after we get your inquiry. If you are very urgent to get the quotation. Please call us or tell us in your mail, so that we could regard your inquiry priority.

Q9: What’s your after-sales service?

A9: We will have a full inspection before the order ship out, but once you find any defective/short of quantity/other problem, pls send us the related pictures by email within one week, we will suggest to you our best solution to satisfy your requirement.

Additional information

Weight0.0135 kg
Dimensions3 × 5.4 cm



DHL/TNT/FedEx 3-10 Working Days



Jewelry Quality

High Quality

Jewelry Material

316L Stainless steel

Jewelry Number


Jewelry Factory Brand


Churinga Jewelry Factory's Big cross pendant price range

2.00 – 3.00

Churinga Jewelry Factory's Small cross pendant price range

1.8 – 2.8

2 reviews for 316L Stainless Steel Jewelry Factory Wholesale High Quality Vintage Religion Style Double Ghost Minimalist Skull Flower Pattern 3d Carving Cross Pendants

  1. Christine R. Frazier
    5 out of 5

    Christine R. Frazier

    Every believer needs to own one of these pendants

  2. James McCune
    5 out of 5

    James McCune

    I have a lot of faith in the churinga jewelry factory. We are long-term partners.

Add a review
316L Stainless Steel Jewelry Factory Wholesale High Quality Vintage Religion Style Double Ghost Minimalist Skull Flower Pattern 3d Carving Cross Pendants