SSDZ-051 Retro Style Skull King Devil Mask Hollow Wholesale Pendant

5.00 out of 5
(1 customer review)

Description

What does Wearing A Skull Pendant Mean?

The most obvious meaning of a skull is death. It’s a popular symbol for free spirits like bikers or rockers. Even famous actors like Johnny Depp, Arnold Schwarzenegger, and Sylvester Stallone have skull pendants in their collection. A skull pendant is a way of embracing and understanding your fate.
What finger do you wear a skull pendant on?
Some people wear them on their right hand, others on their left hand. This is due to the division of Christians into Orthodox and Catholic. Given the dominant hand, it is thought that the right hand is intended for work and the left hand for skull and crossbones.

Is it Bad to Wear Skull Pendants?

When you see a person wearing a skull pendant (or skull jewelry in general), what feelings do you have? Does it cause fear, dismay, or aversion? Many people regard skulls as something bad, as a symbol of death, destruction, and danger. Indeed, skulls can be seen placed on things you should avoid dealing with (poisons, for example). Skulls and crossbones are often present on military insignia to intimidate enemies (for the same reason, by the way, the pirates’ flag, Jolly Roger, features a skull). But did you know that skulls have a different, much more positive, meaning?

So, the negative side of skulls is familiar to everyone. However, there is something that made skulls much-respected all over the world. It turns out that many cultures believe in skulls’ connection with the world of immortals. During some magical rituals, skulls can give immortality; at least this is what ancient shamans and priests hoped for.

When people discovered that a skull accommodates the brain, it immediately became a symbol of wisdom and knowledge. And this is another important significance for the skull.

In the 17-19 centuries, skulls became widespread among military units in Europe. Not only was it present on military insignia to intimidate enemies but also to manifest warriors’ bravery and valor.

From ritual attributes and military ornaments, skulls migrated to jewelry. Their meaning, however, remained unchanged.

SDZ-0260 Stainless Steel Pendant 20210112
CHURINGASDZ-0260 Stainless Steel Skull Pendant
SDZ-0260 Stainless Steel Pendant 20210112
CHURINGASDZ-0260 Stainless Steel Skull Pendant
SDZ-0260 Stainless Steel Pendant 20210112
CHURINGASDZ-0260 Stainless Steel Skull Pendant

About us

Churinga is affiliated with Champion Company Limited, and it is a professional fashion jewelry manufacturer in China, set design, production, wholesale, and export trade as one of the enterprises. Product substrate metals are stainless steel, copper alloy, and silver, a surface thin layer of gold plated, rhodium plated or palladium plating, auxiliary material with artificial gem (synthetic cubic zirconia, synthetic crystal, synthetic ruby, etc).

Product variety, style fashion, good quality, which covers rings, pendants, earrings, bracelets, necklaces, anklets, bangles, jewelry sets, etc. Our series products are sold all over the world, we provide good services to all of the customers at home and abroad.

We are one of the Chinese leading Jewelry manufacturers providing high-quality jewelry with fast delivery and the most competitive pricing. Customized service is our professional offer.

Our Team

our team

Certifications

certifications

Production Process

HOW IS JEWELRY MADE? WHAT IS THE PROCESS OF MAKING JEWELRY?

STEP 1: DESIGNING A 3D JEWELRY MODEL

After the initial idea and/or sketch is developed, it’s time to start work on the digital model. Using CAD (Computer-Aided Design) software, the 3d designer will make a digital render of your jewelry.

STEP 2: 3D WAX PRINTING YOUR JEWELRY

In most modern jewelry production, the manufacturer uses a 3d printing machine to print a wax model made out of resin, which usually doesn’t take more than 48 hours.

The Rubber Mold

The original model is encased in plaster-like investment, which is specially created for jewelry making. After the investment sets, the encased wax model is burned away in an oven, leaving a jewelry-shaped void in the hardened investment. That space is filled with silver, forming a slightly smaller duplicate of the original wax design, which is polished to perfection. The silver master model is then packed into a fat sandwich of special mold rubber and squeezed tight under high heat and pressure until it forms a solid block. The rubber forms itself around the master model, creating a perfect three-dimensional impression of the piece of jewelry. The rubber is cut in half to remove the silver master. Then the rubber is put back together and hot wax is injected through a hole in the rubber to fill the ring-shaped space inside, forming a wax reproduction of the master model (but a bit smaller).

The Wax Tree

To finally turn wax into gold, a number of wax models, usually 10 or 20 are placed on a large branching wax tree. Positioning each piece on the tree must be done carefully, thicker pieces will go on the bottom, thinner on the top and the joint where the piece is joined to each branch must be positioned in a thick place in the design, where there is no detail, like the back of a ring. When the tree is complete, the whole wax structure is placed in a flask.

STEP 3: CASTING THE WAX MODEL INTO METAL

The jewelry goes through the casting process. At this stage, your piece starts looking more like the jewelry you might see in a store. The wax is melted away and is replaced with your metal of choice in molten form, usually gold, silver, or platinum. The metal then dries into the shape of your jewelry. This technique is called “lost wax” casting.

STEP 4: THE PRE-POLISH

First, the jewelry has to be removed from the branch, or sprue, that held it to the tree in the mold. It is then is tumbled into smoothness, sometimes sanded, lapped to make edges crisp, and then buffed by hand on a polishing wheel.

STEP 5: BASIC JEWELRY ASSEMBLY

After your jewelry passes through the design and casting stage, the final fabrication can take anywhere from 3 days to 3 weeks. At this point, the jeweler refines the main structure of your ring, necklace, or another piece.

STEP 6: THE STONE SETTING PROCESS

For this step, the diamond setter finally adds the diamonds or other gemstones onto your piece. He carefully sets the central stone into the mount. If side stones are involved, the setter needs to hand drill for these before setting. Using a microscope, they then set each separate stone.

STEP 7: POLISHING, FINISHING, AND QUALITY ASSURANCE

In the final stage, a polisher works to make sure the metal is polished to perfection so it’s as shiny as possible. Or it only needs a light final polish to bring out the luster and shine of the gold. This is done by putting a fine red jeweler’s rouge on a soft cotton cloth and buffing the piece by hand, making sure that all the details and highlights shine. Finally, the jewelry is inspected and each detail is analyzed to make sure production was successful.

production process

Shipping And Payment

shipping-and-paymentshipping and payment

FAQ

Q1: Are you direct factory wholesale?

A1:Yes, we are direct factory manufacture with more than 10 years experience. Over 200 new arrivals are launched each month. welcome, contact our customer service to know more details.

Q2: Can I place a sample order?

A2:Yes, we welcome samples to check the quality, mixed samples are acceptable. Depending on the design, the design fee charged for samples is $30-$50, and the sample fee will be refunded when ordering in bulk.

Q3: Can I get mixed products?

A3: Yes. Mix color and designs are available.

Q4: Is there a discount for larger orders of Jewelry?

A4: For new customers, there is a small discount, but when the value of the order is increased, we will provide a larger discount. For previous customers, we are happy to provide a discount for your loyalty. Please enquire.

Q5: How to place an order?

A5: You can choose some items you like online, or you can write down the item/code number, with quantities you want, contact our customer service to place an order.

Q6: Can I get one customized sample that laser my logo or make my design?

A6: Yes, OEM or ODM is welcome. customized designs, materials, sizes & colors are available. our designer will according to your picture or ideas to draw/design pictures. The product will arrange production when you confirm. We are willing to provide you with one/two samples for your testing of our design and quality. Sample charged the US $20-100/design depends on the design, sample charge will refund upon bulk order.

Q7: What is the lead time?

A7: It depends on the order quantity and the season you place the order. Generally, it is 2-3 days after getting payment if the goods are in stock. If it is not in stock, normally 7-15 days for small quantity and simple style, and about 25-30 days for large quantity and complicated style. Please kindly contact us and we will provide you with an estimated production time more exactly based on your need.

Q8: When can I get the quotation?

A8: We usually quote you within 24 hours after we get your inquiry. If you are very urgent to get the quotation. Please call us or tell us in your mail, so that we could regard your inquiry priority.

Q9: What’s your after-sales service?

A9: We will have a full inspection before the order ship out, but once you find any defective/short of quantity/other problem, pls send us the related pictures by email within one week, we will suggest to you our best solution to satisfy your requirement.

Additional information

Weight 0.054 kg
Dimensions 3.35 × 7.4 cm
Jewelry Material

MOQ

ODM/OEM

Jewelry number

CHURINGASDZ – 0260

Price range

3.5 – 4.5

1 review for SSDZ-051 Retro Style Skull King Devil Mask Hollow Wholesale Pendant

  1. Christine R. Frazier
    5 out of 5

    Christine R. Frazier

    What still has to compare this more handsome more individual character pendant !!

Add a review
SDZ-0260 Stainless Steel Pendant 20210112
SSDZ-051 Retro Style Skull King Devil Mask Hollow Wholesale Pendant