SSJZ-030 Gold Plated Rose Pink Sapphire Crown Baguette Stacking Rings
What is ring stacking?
Stacking (or layering) rings is a beautiful jewelry trend. It’s not only a way to wear a variety of rings but also a way to express yourself and remember meaningful milestones in your life.
Similar to the bracelet layering trend, ring stacking is a fashion trend. It’s a way to express your personal style through your love of diamonds and gemstones.
Another reason women start stacking rings is to honor a milestone or occasion in their life. A wedding band is a representation of marriage, but there are so many more moments worth remembering. Anniversaries, the birth of children, and the passing of a loved one are a few examples. Wearing a ring that symbolizes that life event is a daily reminder of the mark it made on your life.
Ring stacking (or layering) is a jewelry trend where you wear multiple rings on one or multiple fingers. Many ring stackers start off by adding anniversary rings to their engagement ring and wedding band. However, ring stacking doesn’t have to include wedding rings.
How do I stack my rings?
There are no rules when it comes to stacking rings. Here are some tips to get you started.
Mix rings you already own with new rings you have your eye on. You don’t have to buy all new rings to create the perfect stack. Assess what you already own and which rings would complement each other when stacked.
Incorporate gemstones. If you’re into the gemstone look, stacking is a fun way to express it. Many people have a strong connection to their birthstone, and others identify with another gemstone like sapphire or ruby. Using a gemstone or two in your stack adds color and energy.
Mix simple dainty bands with chunky diamond bands. Don’t worry if two rings aren’t perfectly stacked. Instead, the rings should have an overall cohesive look.
Don’t be afraid to mix different metals and bandwidths. Stacking rose gold with yellow gold is perfectly acceptable. In fact, many ring stackers prefer the unmatched look. The same goes for bandwidth.
Is copper custom jewelry safe to wear?
Copper is safe to wear in that it does not harm the skin. That’s because it is an antimicrobial, which means it stops the growth of micro-organisms such as bacteria, protozoa, fungi, or viruses.
Is wearing copper custom jewelry good for your health?
Wearing copper custom jewelry accessories is believed to emanate the required healing energies within the body. Worn on the wrist as a bracelet or on the finger like a ring, wearers have reported a marked improvement in their condition. … The anti-inflammatory properties of copper reduce pain associated with arthritis.
Churinga is affiliated with Champion Company Limited, and it is a professional fashion jewelry manufacturer in China, set design, production, wholesale, and export trade as one of the enterprises. Product substrate metals are stainless steel, copper alloy, and silver, a surface thin layer of gold plated, rhodium plated or palladium plating, auxiliary material with artificial gem (synthetic cubic zirconia, synthetic crystal, synthetic ruby, etc).
Product variety, style fashion, good quality, which covers rings, pendants, earrings, bracelets, necklaces, anklets, bangles, jewelry sets, etc. Our series products are sold all over the world, we provide good services to all of the customers at home and abroad.
We are one of the Chinese leading Jewelry manufacturers providing high-quality jewelry with fast delivery and the most competitive pricing. Customized service is our professional offer.
STEP 1: DESIGNING A 3D JEWELRY MODEL
After the initial idea and/or sketch is developed, it’s time to start work on the digital model. Using CAD (Computer-Aided Design) software, the 3d designer will make a digital render of your jewelry.
STEP 2: 3D WAX PRINTING YOUR JEWELRY
In most modern jewelry production, the manufacturer uses a 3d printing machine to print a wax model made out of resin, which usually doesn’t take more than 48 hours.
The Rubber Mold
The original model is encased in plaster-like investment, which is specially created for jewelry making. After the investment sets, the encased wax model is burned away in an oven, leaving a jewelry-shaped void in the hardened investment. That space is filled with silver, forming a slightly smaller duplicate of the original wax design, which is polished to perfection. The silver master model is then packed into a fat sandwich of special mold rubber and squeezed tight under high heat and pressure until it forms a solid block. The rubber forms itself around the master model, creating a perfect three-dimensional impression of the piece of jewelry. The rubber is cut in half to remove the silver master. Then the rubber is put back together and hot wax is injected through a hole in the rubber to fill the ring-shaped space inside, forming a wax reproduction of the master model (but a bit smaller).
The Wax Tree
To finally turn wax into gold, a number of wax models, usually 10 or 20 are placed on a large branching wax tree. Positioning each piece on the tree must be done carefully, thicker pieces will go on the bottom, thinner on the top and the joint where the piece is joined to each branch must be positioned in a thick place in the design, where there is no detail, like the back of a ring. When the tree is complete, the whole wax structure is placed in a flask.
STEP 3: CASTING THE WAX MODEL INTO METAL
The jewelry goes through the casting process. At this stage, your piece starts looking more like the jewelry you might see in a store. The wax is melted away and is replaced with your metal of choice in molten form, usually gold, silver, or platinum. The metal then dries into the shape of your jewelry. This technique is called “lost wax” casting.
STEP 4: THE PRE-POLISH
First, the jewelry has to be removed from the branch, or sprue, that held it to the tree in the mold. It is then is tumbled into smoothness, sometimes sanded, lapped to make edges crisp, and then buffed by hand on a polishing wheel.
STEP 5: BASIC JEWELRY ASSEMBLY
After your jewelry passes through the design and casting stage, the final fabrication can take anywhere from 3 days to 3 weeks. At this point, the jeweler refines the main structure of your ring, necklace, or another piece.
STEP 6: THE STONE SETTING PROCESS
For this step, the diamond setter finally adds the diamonds or other gemstones onto your piece. He carefully sets the central stone into the mount. If side stones are involved, the setter needs to hand drill for these before setting. Using a microscope, they then set each separate stone.
STEP 7: POLISHING, FINISHING, AND QUALITY ASSURANCE
In the final stage, a polisher works to make sure the metal is polished to perfection so it’s as shiny as possible. Or it only needs a light final polish to bring out the luster and shine of the gold. This is done by putting a fine red jeweler’s rouge on a soft cotton cloth and buffing the piece by hand, making sure that all the details and highlights shine. Finally, the jewelry is inspected and each detail is analyzed to make sure production was successful.
Shipping And Payment
Q1: Are you direct factory wholesale?
A1:Yes, we are direct factory manufacture with more than 10 years’ experience. Over 200 new arrivals are launched each month. welcome, contact our customer service to know more details.
Q2: Can I place a sample order?
A2:Yes, we welcome samples to check the quality, mixed samples are acceptable. Depending on the design, the design fee charged for samples is $30-$50, and the sample fee will be refunded when ordering in bulk.
Q3: Can I get mixed products?
A3: Yes. Mix color and designs are available.
Q4: Is there a discount for larger orders of Jewelry?
A4: For new customers, there is a small discount, but when the value of the order is increased, we will provide a larger discount. For previous customers, we are happy to provide a discount for your loyalty. Please enquire.
Q5: How to place an order?
A5: You can choose some items you like online, or you can write down the item/code number, with quantities you want, contact our customer service to place an order.
Q6: Can I get one customized sample that laser my logo or make my design?
A6: Yes, OEM or ODM is welcome. customized designs, materials, sizes & colors are available. our designer will according to your picture or ideas to draw/design pictures. The product will arrange production when you confirm. We are willing to provide you with one/two samples for your testing of our design and quality. Sample charged the US $20-100/design depends on the design, sample charge will refund upon bulk order.
Q7: What is the lead time?
A7: It depends on the order quantity and the season you place the order. Generally, it is 2-3 days after getting payment if the goods are in stock. If it is not in stock, normally 7-15 days for small quantity and simple style, and about 25-30 days for large quantity and complicated style. Please kindly contact us and we will provide you with an estimated production time more exactly based on your need.
Q8: When can I get the quotation?
A8: We usually quote you within 24 hours after we get your inquiry. If you are very urgent to get the quotation. Please call us or tell us in your mail, so that we could regard your inquiry priority.
Q9: What’s your after-sales service?
A9: We will have a full inspection before the order ship out, but once you find any defective/short of quantity/other problem, pls send us the related pictures by email within one week, we will suggest to you our best solution to satisfy your requirement.