SSDZ-020 Balck Crystal Rhinestone Charm Men Dog Tags Pendant
Dog Tags Pendants & Necklaces
What do Dog Tags Symbolize?
Dog tags date back to the American Civil War and World War I and II. They’re typically worn as identification in case of casualty or death. During World War II, the United States Army began including religious preference, but it was limited to P for Protestant, C for Catholic, or H for Jewish. Later, during the Korean War (1950-53), the letter X was added for ‘not listed’ and a Y for no religion or a choice to not list. Sorry, Jedis, you’ll have to choose X.
Soldiers traditionally wear 2 dog tags – one that stays with the body and one collected for identification and record-keeping. One tag is on the main chain and the other is attached by a smaller chain for quick removal.
Dog Tags & Engraving
Dog tag necklaces have moved from the battlefield to fashion and, while no longer used to identify a body at the morgue, still hold a degree of self-identification. Today, you can engrave dog tags with everything from a special date to a reminder to ‘Believe’ (thanks, Beiber).
If your dog tag is engraved with something personal or meaningful, you might want to wear it under your shirt… especially when headed to the office or a formal event. Otherwise, wear the necklace on the outside and get ready to start a conversation.
How long are Dog Tag Pendants & Necklaces?
Dog tag Pendants & Necklaces Chain Matching Length Selection Guide
For most men’s chains, 50 cm (20”) is the average length. This falls at the collar bone between the top two buttons on a shirt and looks good inside or outside the shirt. If you’re wearing a pendant necklace, opt for 55-63 cm (22-25”) so the pendant finishes in the middle of your chest.
- 35-45 cm (14-18”) – Quite form-fitting and will be visible above your shirt.
- 50-55 cm (20-22”) – Falls at the collarbone and is the most common size for men’s necklaces. Can be worn inside or outside the shirt.
- 55-61 cm (22-24”) – Falls in the middle of the chest and looks great with a medallion, pendant, or dog tags pendants & necklaces. Can be worn inside or outside the shirt.
- 61-76 cm (24-30”) – Designed to be worn on the outside of your shirt. Looks best with a larger pendant or a thicker chain. Total attention-grabber.
What is Bling Jewellery?
For those interested in Hip Hop and the bling jewelry that goes with it, here is a general guide as to the type of jewelry worn and how to judge quality when making a purchase. Bling jewelry is usually made in silver or gold with cubic zirconia or diamonds. The term “bling” itself represents the shine and glitter coming from cubic zirconia or diamond stones. The type of material used will be based on your financial profile as silver and cubic zirconia bling jewelry can cost as little as twenty dollars whereas gold and diamonds can easily cost thousands. Hip Hop bling jewelry consists of primarily pendants, chains, and bracelets. Before making a purchase you should know the general styles, sizes, and thoughts usually associated with the mainstream of bling Hip Hop jewelry.
Hip Hop bling pendants tend to fall into the categories of cross pendants, custom pendants, or miscellaneous pendants. Generally, the size of a bling pendant is important because larger pendants are more flamboyant and represent a higher wealth status. Bling pendants are usually set with cubic zirconia or diamond stones and range in size from three to five inches in length. Bling cross pendants are popular due to their inherent representation of religion, an important part of the spiritual aspect of Hip Hop. Bling crosses are classically designed incorporating pointed ends with busy artwork.
Customized pendants are usually exclusive designs representing some aspect of one’s work or belief. They are worn primarily by those who can afford such commissions, namely musicians and actors. Unlike other types of bling jewelry almost all custom bling pendants feature real diamond stones. This is strictly a financial issue as those who can afford to pay for a customized bling pendant can also afford to buy real diamonds. Bling pendants also come in a variety of popular designs such as dog tags, spinning rims, crowns, and microphones.
What is Statement Jewelry?
Statement jewelry is unique and bold and helps the wearer portray who they are through their outward appearance. Wearing bold and stylish jewelry is nothing new, ancient civilizations such as the Egyptians used statement jewelry in ceremonies, rituals, and to show divine favor.
What does a Statement Necklace Mean?
Simple. It’s a beautiful necklace that makes a huge statement when you put it on – that’s the essential definition. Often, this great necklace is large-sized and quite possibly over the top that goes with a simple outfit in simple words – a bold necklace that everyone will notice immediately.
Bling Jewelry & Statement Jewelry & Dog Tags Pendants Details
Churinga is affiliated with Champion Company Limited, and it is a professional fashion jewelry manufacturer in China, set design, production, wholesale, and export trade as one of the enterprises. Product substrate metals are stainless steel, copper alloy, and silver, a surface thin layer of gold plated, rhodium plated or palladium plating, auxiliary material with artificial gem (synthetic cubic zirconia, synthetic crystal, synthetic ruby, etc).
Product variety, style fashion, good quality, which covers rings, pendants, earrings, bracelets, necklaces, anklets, bangles, jewelry sets, etc. Our series products are sold all over the world, we provide good services to all of the customers at home and abroad.
We are one of the Chinese leading Jewelry manufacturers providing high-quality jewelry with fast delivery and the most competitive pricing. Customized service is our professional offer.
STEP 1: DESIGNING A 3D JEWELRY MODEL
After the initial idea and/or sketch is developed, it’s time to start work on the digital model. Using CAD (Computer-Aided Design) software, the 3d designer will make a digital render of your jewelry.
STEP 2: 3D WAX PRINTING YOUR JEWELRY
In most modern jewelry production, the manufacturer uses a 3d printing machine to print a wax model made out of resin, which usually doesn’t take more than 48 hours.
The Rubber Mold
The original model is encased in plaster-like investment, which is specially created for jewelry making. After the investment sets, the encased wax model is burned away in an oven, leaving a jewelry-shaped void in the hardened investment. That space is filled with silver, forming a slightly smaller duplicate of the original wax design, which is polished to perfection. The silver master model is then packed into a fat sandwich of special mold rubber and squeezed tight under high heat and pressure until it forms a solid block. The rubber forms itself around the master model, creating a perfect three-dimensional impression of the piece of jewelry. The rubber is cut in half to remove the silver master. Then the rubber is put back together and hot wax is injected through a hole in the rubber to fill the ring-shaped space inside, forming a wax reproduction of the master model (but a bit smaller).
The Wax Tree
To finally turn wax into gold, a number of wax models, usually 10 or 20 are placed on a large branching wax tree. Positioning each piece on the tree must be done carefully, thicker pieces will go on the bottom, thinner on the top and the joint where the piece is joined to each branch must be positioned in a thick place in the design, where there is no detail, like the back of a ring. When the tree is complete, the whole wax structure is placed in a flask.
STEP 3: CASTING THE WAX MODEL INTO METAL
The jewelry goes through the casting process. At this stage, your piece starts looking more like the jewelry you might see in a store. The wax is melted away and is replaced with your metal of choice in molten form, usually gold, silver, or platinum. The metal then dries into the shape of your jewelry. This technique is called “lost wax” casting.
STEP 4: THE PRE-POLISH
First, the jewelry has to be removed from the branch, or sprue, that held it to the tree in the mold. It is then is tumbled into smoothness, sometimes sanded, lapped to make edges crisp, and then buffed by hand on a polishing wheel.
STEP 5: BASIC JEWELRY ASSEMBLY
After your jewelry passes through the design and casting stage, the final fabrication can take anywhere from 3 days to 3 weeks. At this point, the jeweler refines the main structure of your ring, necklace, or another piece.
STEP 6: THE STONE SETTING PROCESS
For this step, the diamond setter finally adds the diamonds or other gemstones onto your piece. He carefully sets the central stone into the mount. If side stones are involved, the setter needs to hand drill for these before setting. Using a microscope, they then set each separate stone.
STEP 7: POLISHING, FINISHING, AND QUALITY ASSURANCE
In the final stage, a polisher works to make sure the metal is polished to perfection so it’s as shiny as possible. Or it only needs a light final polish to bring out the luster and shine of the gold. This is done by putting a fine red jeweler’s rouge on a soft cotton cloth and buffing the piece by hand, making sure that all the details and highlights shine. Finally, the jewelry is inspected and each detail is analyzed to make sure production was successful.
Shipping And Payment
Q1: Are you direct factory wholesale?
A1:Yes, we are direct factory manufacture with more than 10 years’ experience. Over 200 new arrivals are launched each month. welcome, contact our customer service to know more details.
Q2: Can I place a sample order?
A2:Yes, we welcome samples to check the quality, mixed samples are acceptable. Depending on the design, the design fee charged for samples is $30-$50, and the sample fee will be refunded when ordering in bulk.
Q3: Can I get mixed products?
A3: Yes. Mix color and designs are available.
Q4: Is there a discount for larger orders of Jewelry?
A4: For new customers, there is a small discount, but when the value of the order is increased, we will provide a larger discount. For previous customers, we are happy to provide a discount for your loyalty. Please enquire.
Q5: How to place an order?
A5: You can choose some items you like online, or you can write down the item/code number, with quantities you want, contact our customer service to place an order.
Q6: Can I get one customized sample that laser my logo or make my design?
A6: Yes, OEM or ODM is welcome. customized designs, materials, sizes & colors are available. our designer will according to your picture or ideas to draw/design pictures. The product will arrange production when you confirm. We are willing to provide you with one/two samples for your testing of our design and quality. Sample charged the US $20-100/design depends on the design, sample charge will refund upon bulk order.
Q7: What is the lead time?
A7: It depends on the order quantity and the season you place the order. Generally, it is 2-3 days after getting payment if the goods are in stock. If it is not in stock, normally 7-15 days for small quantity and simple style, and about 25-30 days for large quantity and complicated style. Please kindly contact us and we will provide you with an estimated production time more exactly based on your need.
Q8: When can I get the quotation?
A8: We usually quote you within 24 hours after we get your inquiry. If you are very urgent to get the quotation. Please call us or tell us in your mail, so that we could regard your inquiry priority.
Q9: What’s your after-sales service?
A9: We will have a full inspection before the order ship out, but once you find any defective/short of quantity/other problem, pls send us the related pictures by email within one week, we will suggest to you our best solution to satisfy your requirement.
|Dimensions||2.9 × 5.1 cm|
Hip Hop Bling Jewelry, Statement Jewelry, Dog Tags
Cubic Zirconia, Crystal, Rhinestone
Cubic Zirconia, Hip Hop Bling
|Jewelry Wholesale Price Range||
2.00 – 3.00